01
ERW Tube and Profile Mills
Turnkey lines for welded steel tube from Ø10 to Ø406 mm and square/rectangular profiles from 10×10 to 300×300 mm.
- Tube diameter
- Ø10 – Ø406 mm
- Wall thickness
- 0.50 – 12.70 mm
- Line speed
- up to 160 m/min
Products
Production lines
ERW tube and profile mills, direct forming, open profile, coil slitting and cut-to-length lines, plus flying cold saws and high-frequency welders. Every line is engineered, built and installed turnkey.
02
Direct Forming Tube Mills
Direct forming lines that produce 20×20 – 120×120 mm square and rectangular profiles with no roll change — sizes are set from the computer.
- Profile size
- 20×20 – 120×120 mm
- Wall thickness
- 1.10 – 6.00 mm
- Line speed
- up to 130 m/min
03
Coil Slitting Lines
Slitting lines with optional double slitter head that cut 0.50 – 12.00 mm coils up to 2000 mm wide into strips of the required width.
- Sheet thickness
- 0.50 – 12.00 mm
- Coil width
- up to 2000 mm
- Coil weight
- up to 30 t
04
Cut-to-Length Lines
Cut-to-length lines that level 0.50 – 16.00 mm coils, cut them to the required length without stopping, and stack the sheets automatically.
- Sheet thickness
- 0.50 – 16.00 mm
- Coil width
- up to 2000 mm
- Coil weight
- up to 30 t
05
Open Profile Roll Forming Lines
Turnkey cold roll forming lines for any open or special-section profile, designed with our in-house roll design software.
- Profile type
- Open and special sections
- Roll design
- With our in-house software
- Project
- Turnkey, tailored to your profile
06
Flying Cold Saws
Single-head and double-head (orbital) flying cold saws that cut Ø10 – Ø274 mm tube and profile to precise length without stopping the line.
- Tube diameter
- Ø10 – Ø274 mm
- Wall thickness
- 0.50 – 12.00 mm
- Speed
- up to 160 m/min
07
High-Frequency Welders
100 – 500 kW, 200 – 400 kHz solid-state high-frequency welders for continuous ERW welding on steel tube and profile mills.
- Power
- 100 – 500 kW
- Frequency
- 200 – 400 kHz
- Efficiency
- above 85%
Request a Quote
Request a quote
Can’t find your size in the tables?
The machines in our tables are standard models. We engineer the line around your diameter, wall thickness, width and speed requirements.
Products
Lines at a glance
| Line | Working range | |
|---|---|---|
| ERW Tube and Profile Mills | Tube diameter: Ø10 – Ø406 mm · Wall thickness: 0.50 – 12.70 mm · Line speed: up to 160 m/min · Standard models: 13 models (BTM 100 – BTM 1275) | |
| Direct Forming Tube Mills | Profile size: 20×20 – 120×120 mm · Wall thickness: 1.10 – 6.00 mm · Line speed: up to 130 m/min · Roll change: None | |
| Coil Slitting Lines | Sheet thickness: 0.50 – 12.00 mm · Coil width: up to 2000 mm · Coil weight: up to 30 t · Line speed: up to 220 m/min | |
| Cut-to-Length Lines | Sheet thickness: 0.50 – 16.00 mm · Coil width: up to 2000 mm · Coil weight: up to 30 t · Line speed: up to 60 m/min | |
| Open Profile Roll Forming Lines | Profile type: Open and special sections · Roll design: With our in-house software · Project: Turnkey, tailored to your profile | |
| Flying Cold Saws | Tube diameter: Ø10 – Ø274 mm · Wall thickness: 0.50 – 12.00 mm · Speed: up to 160 m/min | |
| High-Frequency Welders | Power: 100 – 500 kW · Frequency: 200 – 400 kHz · Efficiency: above 85% |
