Cut-to-Length Lines
Cut-to-length lines that level 0.50 – 16.00 mm coils, cut them to the required length without stopping, and stack the sheets automatically.
- Sheet thickness
- 0.50 – 16.00 mm
- Coil width
- up to 2000 mm
- Coil weight
- up to 30 t
- Line speed
- up to 60 m/min
Overview
Our cut-to-length lines level coils from 0.50 mm to 16.00 mm, cut them to the required length with a flying shear without stopping the line, and stack them automatically. The result: flat sheets with precise dimensions.
With a 14-roll leveller, pressure settings controlled by a digital scale and a double stacking table, your line keeps producing even while a stack is being packed.
Key features
- 14-roll leveller for excellent sheet flatness
- Flying shear that cuts without stopping the line
- Pressure setting controlled by a digital scale
- Automatic stacking with hydraulic side guides
- Double stacking table for non-stop packing
- European automation and hydraulic components
- Installation, training and a 1-year full warranty
Cut-to-length lines technical specifications
Scroll sideways to see the full table| No. | Sheet thickness (mm) | Coil width (mm) | Coil inner diameter (mm) | Coil outer diameter, max. (mm) | Coil weight, max. (t) | Max. speed (m/min) |
|---|---|---|---|---|---|---|
| 1 | 0.50 – 2.00 | 500 – 1600 | 508 – 610 | 1600 | 16 | 60 |
| 2 | 0.80 – 3.00 | 500 – 1600 | 508 – 610 | 1800 | 18 | 50 |
| 3 | 1.50 – 5.00 | 700 – 1600 | 508 – 800 | 2000 | 20 | 40 |
| 4 | 2.00 – 6.00 | 800 – 1600 | 508 – 900 | 2200 | 25 | 35 |
| 5 | 3.00 – 8.00 | 800 – 2000 | 610 – 900 | 2200 | 30 | 32 |
| 6 | 4.00 – 10.00 | 800 – 2000 | 610 – 900 | 2200 | 30 | 30 |
| 7 | 5.00 – 12.00 | 900 – 2000 | 610 – 900 | 2200 | 30 | 25 |
| 8 | 6.00 – 16.00 | 900 – 2000 | 610 – 900 | 2200 | 30 | 20 |
* The machines listed are standard models; we engineer lines for the thickness, width and capacity you need.
Line layout
Explore the line from start to finish
Drag the plan, zoom in or tap a station. Units with photos open in detail with a single tap.
01
Coil car
02
Uncoiler with hold-down press
03
Leveller (6–12 mm)
04
Transfer table
05
Leveller (0.8–6 mm)
06
Flying shear
07
Conveyor
08
Automatic packing unit
Whole line
Cut-to-Length Lines
The line consists of the following units
- Coil car
- Decoiler
- Leveller (14 rolls)
- Flying shear
- Transfer conveyor
- Automatic stacking and packing unit
- Electrical, hydraulic and automation group
- Installation, commissioning and 1-year full warranty
Cut-to-Length Lines
Line units
Tap a card for details on each unit.
01 / 06
Coil Car
The unit where the coil to be cut first enters the line. The coil placed on the car is loaded onto the decoiler mandrel by this unit.
02 / 06
Decoiler
Continuously feeds the coil into the cut-to-length line. Heads moved by two opposing cylinders clamp the material, and the hold-down roll guides the sheet to the leveller.
03 / 06
Leveller
The coil head is fed to the levelling rolls by a pair of driven pinch rolls with hydraulic pressure, and the material is levelled as it passes through 14 rolls. Roll pressure is adjusted automatically by a worm screw, and the pass setting is controlled from the operator desk with a digital scale.
04 / 06
Flying Shear
Cuts the levelled sheet to the required length without stopping the line. It travels on a linear slide mounted on the frame and performs all functions automatically, synchronised with the line.
05 / 06
Transfer Conveyor
Sheets cut by the flying shear are carried by conveyor to the automatic packing unit; packing can be done on both sides.
06 / 06
Automatic Stacking and Packing Unit
Cut sheets reach the stack on moving rollers and are aligned by hydraulic side guides. While one of the two stacking tables is stacking, the other is used for packing, so production never stops. The tables travel on rails, each driven by its own geared motor, and the active stack runs automatically.
Cut-to-Length Lines
Videos
Cut-to-length line 2.00 × 6.00 × 1600 mm
Cut-to-length line
The video loads from YouTube when you press play.
Cut-to-Length Lines
Gallery
Cut-to-Length Lines
Frequently asked questions
Share your material, product dimensions and capacity target — our engineers will prepare a technical proposal tailored to you.
Which thicknesses can the cut-to-length line process?
Our standard models process coils of 0.50 – 16.00 mm thickness and up to 2000 mm width.
How is sheet flatness achieved?
The coil passes through a 14-roll leveller. Roll pressure is adjusted automatically by a worm screw and controlled from the operator desk with a digital scale.
Does the line stop while packing?
No. While one of the two stacking tables is stacking, the other is used for packing, so production continues without interruption.
Production lines
Other production lines
01
ERW Tube and Profile Mills
Turnkey lines for welded steel tube from Ø10 to Ø406 mm and square/rectangular profiles from 10×10 to 300×300 mm.
- Tube diameter
- Ø10 – Ø406 mm
- Wall thickness
- 0.50 – 12.70 mm
- Line speed
- up to 160 m/min
02
Direct Forming Tube Mills
Direct forming lines that produce 20×20 – 120×120 mm square and rectangular profiles with no roll change — sizes are set from the computer.
- Profile size
- 20×20 – 120×120 mm
- Wall thickness
- 1.10 – 6.00 mm
- Line speed
- up to 130 m/min
03
Coil Slitting Lines
Slitting lines with optional double slitter head that cut 0.50 – 12.00 mm coils up to 2000 mm wide into strips of the required width.
- Sheet thickness
- 0.50 – 12.00 mm
- Coil width
- up to 2000 mm
- Coil weight
- up to 30 t
